Beds: 4Baths: 5m²: 391
Prices €1,041,000 – €1,154,000
A boutique development of 6 semi detached luxury 4 bedroom contemporary residences in Artola, Cabopino with panoramic and picturesque views to the sea over Cabopino Golf and it’s fairway lined canopy of pine trees. Located just east of Marbella town, Cabopino is known for it’s natural beauty, pine forest and the famous Artola Beach which is widely regarded as one of the top beaches in Spain with golden sand dunes, exceptionally clean water and great beach restaurants.
Cabopino’s stylish marina is just a short stroll away, and while smaller and more intimate than Puerto Banus, features an array of facilities including a wide choice of stylish restaurants, lounge bars and shops. Taking full advantage of the natural terrain, elevated position and proximity to the beach, all 6 residences boast stunning views of the sea from every floor.
Distributed over 3 levels each residence has a wide array of features for luxury and contemporary living including; a private pool, personal elevator, rooftop solarium, double-car underground garage and large stylish walk-in dressing rooms also with sea views. The community features lush gardens with a beautiful pool area and is securely gated around it’s perimeter.
Avg. built area 292.52 m2
Avg. terraces area 195.38 m2
Avg. garden area 78.28 m2
Ceiling heights 3.5m – 7.0m
Private pool size 3m x 3m
Airport 42 km 30 min N/A min
Beach 1.7 km 5 min 20 min
Golf Clubhouse 1.0 km 2 min 10 min
Supermarket 1.8 km 5 min 20 min
Puerto Banus 25 km 23 min N/A min
Foundations and Structure
Both the foundations and the structure shall be carried out in reinforced concrete.
Enclosures and Façades
The exterior enclosures of the property shall becarried out with half-brick wall and continued mortar covering. Cavity insulation with projected polyurethane and plasterboard on the inside with insulated dry partition walls. The interior distribution of the dwellings shall be executed with insulated dry partition walls. The dividing walls between the different dwellings and between dwellings and common areas shall be executed with sound-absorbent brick walls covered with plasterboard on both sides, with insulated dry partition walls.
The technical roof terraces, which house the exterior equipment units, are finished off as flat non-passable rooftops with thermal insulation and protected with gravel. They are separated conveniently from the private solariums. The private solariums and terraces shall be tiled with exterior-use gres tiles made by PORCELANOSA.
For the tiling of the main areas of the dwelling and kitchens, we shall use porcelain gres tiles with a marble finish made by PORCELANOSA with a skirting board of the same material on the Ground Floor and wooden flooring on the First Floor. The bathrooms shall be tiled with porcelain gres tiles by PORCELANOSA. The walls in the bathroom and guest toilets shall be tiled with porcelain gres tiles by PORCELANOSA in their entire surface. Glass screens in the bath and shower area and a mirror over the washbasin. Plasterboard suspended ceilings throughout the
dwelling with inspection holes towards in areas reserved for interior air conditioning machines. Smooth plastic paint on non-tiled walls and ceilings.
The exterior windows and doors throughout the dwelling (sliding or tilting, as the case may be) shall be with aluminium profiles with breakage of thermal bridge and anodised or lacquered finished in grey with double glazing and thermo-acoustic, aluminium blinds with thermal insulation inside and insulated blind boxes (except in kitchens with window and living areas).
Access to the dwelling through an armoured door with a safety lock finished with a lacquered panelling matching the interior carpentry. Smooth, lacquered interior doors and locks on the bathroom and master bedroom doors. Modular wardrobes with folding doors, lacquered to match the rest of the carpentry, including a suitcase holder and hanging rail, except in the master bedroom.Access to the dwelling through an armoured door with a safety lock finished with a lacquered panelling matching the interior carpentry. Smooth, lacquered interior doors and locks on the bathroom and master bedroom doors. Modular wardrobes with folding doors, lacquered to match the rest of the carpentry, including a suitcase holder and hanging rail, except in the master bedroom.
Plumbing and sanitary fittings
Interior water distribution network with reticulated polyethylene pipes. In bathrooms, Vitrified Porcelain sanitary fittings made by ROCA, except baths and shower trays, which shall be acrylic. Thermostatic taps in baths and showers. Mixer taps in the rest of the sanitary fittings. Taps and sanitary fittings with water saving systems.
Electric installation carried out in accordance with the Low Tension Electro-Technical Regulation with a high degree of electrification. Illumination with Dichroic LEDs in bathrooms and hallways. Television, Telephone and Telecommunication outlets in living area and bedrooms and television on terraces. Presence detectors in common area. Niessen or similar electric house mechanisms.
Indirect lights in the suspended ceilings of the living rooms. The use of lights with LED technology in common areas and urbanisation.
Aerothermal installation to provide Domestic Hot Water, Air Conditioning and Underfloor Heating throughout the dwelling except for the basement and rooftop terrace. Interior unit placed in the basement and exterior one placed on the roof. Fully Fitted Air Conditioning with a low-profile heating system with a heat pump (cooling and heating) and fibreglass ducts. Interior unit on
suspended ceiling in bathrooms. Installation of an electric water heater as a contribution to the domestic hot water. Intercom with a receiver and colour image. Lifts with automatic doors and capacity for 4 persons with 4 stops, per property. Installation of an air renewal system inside the dwellings with extraction inlets in bathrooms and kitchens.
Interior Common Areas
The common areas shall be tiled with porcelain gres tiles by PORCELANOSA. Smooth plastic paint
on walls and ceilings.
Automated vehicle access doors Mechanically smoothed concrete floor. Interior areas finished with plastic paint and gres flooring. Concrete walls in the parking area. Water points for cleaning purposes.
Common pools with saline chlorination. Extensive garden areas.
Sustainability and Energy Savings
The entry into force of the Technical Building Code and other regulations meant a drastic change regarding the requirements of insulation and sustainability of buildings. Metrovacesa Suelo y Promoción, in our commitment to sustainability, would like to take one step further, providing our developments with elements that further better the strict requirements that the regulations already mark. Our commitment has been transferred to this development since its very conception, by establishing the measures to reduce the energy consumption and the emission of greenhouse gases below the levels of strict regulations. In application of the above, we have carefully studied the design both of the outer part of the building and of the installations inside it, adopting a series of measures and systems, among which we can highlight the following:
• The orientation of the dwellings permits thermal gains inside the dwellings by seeking the sun in winter, thereby reducing the consumption of heating, and we brought back the most exposed façades to protect the property from overheating due to the summer sun.
• The composition of the façades, with the inclusion of a double insulation, permits obtaining a double thermal insulation -65% higher than the requirements of the regulations-, as well as the insulation of the roofs and floors of the lower floor, which minimise the energy losses from the dwelling, and consequently the energy consumption both for the heating and cooling.
• Including the breakage of the thermal bridge in the exterior carpentry, combined with the double-glazing, air chamber and the thermally insulated aluminium blinds, provides a high degree of insulation, both thermal and acoustic.
• We have designed the dwellings with natural crossed ventilation and a mechanical system, which permits ensuring the appropriate conditions of thermal and sanitary conditions inside it with low energy consumption.
• The dimensioning of the door and window openings ensures a correct natural light during most of the day without having to resort to artificial light sources, as well as a correct ventilation of the dwelling.
• Heating through Aerothermal heat pumps (high energy efficiency) and A+ classification with a low noise level.
Updated on January 31, 2020 at 8:57 pm
1 year ago
Villas Residences, Cabopino - Av. de los Acebos, 91, 29604 Marbella, Spain
Villas Residences, Cabopino - Av. de los Acebos, 91, 29604 Marbella, Spain